 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HTE Cylindrical High Voltage Resistors,Thicker film,Non-Inductive High Voltage High Frequency Resistors for various High Voltage Applications HTE - series to meet general set of requirements , high voltages at reasonable prices. HTE is in epoxy coating which is very good humidity protection, and a wide range of tolerances,TCR available. HTE Precision High Voltage Resistor, The main usage ; Epoxy coating for excellent humidity protection Std. Resistance tolrerance : 0.5% 1% 2% 5% 10% Main application for HV energy Capacitor's charger& discharger, various HV Loads, HV Snubber, HV dampping ,on HV diode, R-C tank,in Ion gun's termination,etc... * Resistance rating : 1k to 700M * Power Ratings up to 15 Watts. * Various Models with Voltage Ratings from 2.5kV to 48kV in free air. * N.C.R. design : Non-contact resistance design between resistives and termination cap ,put on 3RLab's unique of conductive pad.Willow Model Nr. HTE15 HTE19 HTE25 HTE24 HTE39 HTE52 HTE76 HTE102 HTE127 HTE152 + + + ** Wattage 0.7 1.0 1.2 2.0 3.0 5.0 7.5 10.0 12.0 15.0 **Max. Continuous Oper. Volt[kV] 2.5 3.5 5.5 5.5 10.0 15.0 22.5 32.0 40.0 48.0 Resistance [ ohm ] Min. Max. 1K200M 1K200M 1K200M 1K300M 1K500M 1K500M 1K500M 1K700M 1K500M 1K700M Dimensions in millimeters (inches) A B C 15+/-1.5 (.590) 19+/-1.5 (.748) 25.4+/-1.5 (1.0) 24.0+/-1.5 (.944) 39.0+/-1.5 (1.50) 52.0+/-1.5 (2.04) 76.0+/-1.5 (2.54) 102.0+/-1.5 (4.01) 127.0+/-1.5 (5.00) 152.0+/-1.5 (5.98) 5.0+/-1.5 (.197) 5.0+/-1.5 (.197) 5.0+/-1.5 (.197) 8.0+/-1.0 (.314) 8.0+/-1.0 (.314) 8.0+/-1.0 (.314) 9.0+/-1.0 (0.354) 9.0+/-1.0 (0.354) 9.0+/-1.0 (0.354)1.0 9.0+/-1.0 (0.354) SMD type N/A N/A N/A available available available availableon request N/A N/A N/A 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Customdimension&specificationavailableuponrequest AbovementionedElectricalspecificationapplicablefor0.1M ~700Monly Voltagerestrictedbytheratedpower Vdc,Vrmsstandard.Andat1.2/50impulse;std.Voltagex1.5timesavailable HTE 35 5 Cylindrical High Voltage Resistors,Thicker film,Non-Inductive DIMENSIONS [mm] A B C SPECIFICATIONS Resistance Tolerance : 1% 2% 5% 10% ,and 0.5%.. And (from 1k to 100M ; 0.1%, 0.25% special order available upon request, *but some parts unable to special tolerance) Endurable Harsh to Environment (Temperature ) : -55C to +195C , Max. broken temperature on resistive of parts is 600 (for 70min.) Temperature Coefficient of Resistance: 100ppm/C standard referenced to 25C, from -25C to +125C. ( 80ppm/C and special TCR upon request ) Overload/Voltage : 5 times rated power with applied voltage not to exceed 1.5times maximum continuous operating voltage for 5 seconds R 0.5% max. Thermal Shock : Mil-Std-202, Method- 107, Cond. C, R 0.25% max. Load Life : 1.000 hours at rated power R 0.7% max. Moisture Resistance : Mil-Std-202, Method 106, R 0.4% max. Lead Material : Tinned plated copper solsderable semiflexible axial wire. Insulation Resistance : 10,000M Min. Termination Cap of Material: Tinned Cap. Encapsulation : Epoxy conformal. Resistive Material : Thicker Film. Contact method between Resistives and termination Caps : Individual Conductive Pads . So,called "NCR" Non-contact resistance. DERATING CURVE Rated Power or Voltage% 00 80 60 40 0 0 5 75 5 75 5 Ambient-Temperature (C) APPLICATION GUIDE ; HTE SERIES * Automated Test (ATE) * Medical (Imaging) * Ion Source * Chromatography (Gas) * Medical (Radiation Therapy) * Military , Radar ,Laser ,Plasma * Measurements (High Voltage) * HV Capacitor Charging, Discharging * Electric Power Transmission High Voltage * Medical (Blood Analyzers) * Corona Generators * Multichannel Analyzers *Ratedpower,andvoltageof% * Ozone Generating * Detectors * Nuclear Instrumentation * Electron Beam * Pulse Generators * Surface Analysis *CT, MRI * Electrophoresis * Image Intensifier * Surface Analysis * Piezo. Focusing (Poling) * High Voltage Dividers * Stress Testing * Klystron, Magnetron, Microwave cf.: The described specifications & dimensions subject to change without notice. Willow Technologies Ltd. Shawlands Court, Newchapel Road, Lingfield, Surrey, RH7 6BL, United Kingdom. info@willow.co.uk http://www.willow.co.uk + 44 (0) 1342 835234 + 44 (0) 1342 834306 |
Price & Availability of HTE52
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |